Autor Thema: Regleranzeige  (Gelesen 8455 mal)

Loknarr

  • Fahrdienstleiter
  • *****
  • Beiträge: 551
  • Oberpfalz
Regleranzeige
« am: 04. Januar 2010, 08:39:59 »
@Alle

Mal wieder habe ich ein kleines Problem. Bei meiner BR 219 fehlt die Regleranzeige. Nur wenn man mit der Maus über den Regler fährt, wird sie angezeigt.
Entweder es ist diese Lok:
http://www.thetrain.de/de/downloadarea/db219-074-4/
oder diese Lok:
http://www.thetrain.de/de/downloadarea/ud-db219-074-4/
Bitte helft mir.

@HERMA

Das steht jetzt aber wirklich nicht in der Liesmich. ;D

MfG
Loknarr
Bei Einbruch der Finsternis muss mit Dunkelheit gerechnet werden!

oldtrain

  • Weichenreiniger
  • *
  • Beiträge: 32
Re: Regleranzeige
« Antwort #1 am: 04. Januar 2010, 11:10:24 »
@Loknarr

Dann sieh mal #3 in diesem Forum.... ;).





Gruß oldtrain

HERMA

  • Globaler Moderator
  • *****
  • Beiträge: 875
Re: Regleranzeige
« Antwort #2 am: 04. Januar 2010, 11:43:49 »
@Loknarr !

Als einfachste Lösung schlage ich vor, den
  Combined_Control( 0 1 0.5 0.5 throttle dynamic ) aus der eng-file ganz unten löschen.
Es ist kein Kombihebel in der *.cvf eingetragen,
Das nachzuschreiben ist etwas für Fortgeschrittene.
HERMA

Loknarr

  • Fahrdienstleiter
  • *****
  • Beiträge: 551
  • Oberpfalz
Re: Regleranzeige
« Antwort #3 am: 04. Januar 2010, 19:23:59 »
@HERMA

Vielen Dank! Es funktioniert! ;D

MfG
Loknarr
Bei Einbruch der Finsternis muss mit Dunkelheit gerechnet werden!

Loknarr

  • Fahrdienstleiter
  • *****
  • Beiträge: 551
  • Oberpfalz
Re: Regleranzeige
« Antwort #4 am: 05. Januar 2010, 21:27:44 »
@HERMA

Habe hier noch einen derartigen Problemfall, die BR 612, die man hier herunterladen kann:

http://www.thetrain.de/de/downloadarea/db-br-612-ic-lackierung/

In dem Forum von oldtrain habe ich auch schon nachgesehen, finde aber nichts brauchbares. Allerdings erkannte ich, dass es auch oft was mit dem Cabview zu tun hat. Ich verwende den BR 612 Cabview von PT 15.
So sieht er aus, wenn man ihn mit Editor öffnet:


SIMISA@@@@@@@@@@JINX0h0t______

Tr_CabViewFile (
   CabViewType ( 2 )
   CabViewFile ( n-front1024.ace )
   CabViewWindow ( 0 0 640 480 )
   CabViewWindowFile ( n-front.ace )
   Position ( 0 2.8 11.4 )
   Direction ( 5 0 0 )
   CabViewFile ( n-links1024.ace )
   CabViewWindow ( 0 0 640 480 )
   CabViewWindowFile ( n-links1024.ace )
   Position ( 0 2.5 11.4 )
   Direction ( 7 -55 0 )
   CabViewFile ( n-rechts1024.ace )
   CabViewWindow ( 0 0 640 480 )
   CabViewWindowFile ( n-rechts1024.ace )
   Position ( 0 2.5 11.4 )
   Direction ( 7 47 0 )
   EngineData ( PT-612-v )
   CabViewControls ( 18
      CombinedControl (
         Type ( CP_HANDLE COMBINED_CONTROL )
         Position ( 147 328 65 128 )
         Graphic ( n-kombi.ace )
         Style ( NOT_SPRUNG )
         MouseControl ( 1 )
         NumFrames ( 16 4 4 )
         NumPositions ( 13 12 11 10 9 8 7 6 5 4 3 2 1 0 )
         NumValues ( 13 0 0.0625 0.125 0.1875 0.25 0.3125 0.375 0.4375 0.5 0.65 0.925 0.95 0.975 )
         Orientation ( 1 )
         DirIncrease ( 0 )
      )
      Digital (
         Type ( SPEEDLIM_DISPLAY DIGITAL )
         Position ( 315 319 40 20 )
         ScaleRange ( 0 160 )
         Accuracy ( 0 )
         AccuracySwitch ( 0 )
         LeadingZeros ( 1 )
         Justification ( 0 )
         PositiveColour ( 2
            ControlColour ( 192 192 0 )
            SwitchVal ( 40 )
            ControlColour ( 0 192 0 )
         )
         NegativeColour ( 0 )
         DecreaseColour ( 0 )
         Units ( KM_PER_HOUR )
      )
      CabSignalDisplay (
         Type ( ASPECT_DISPLAY CAB_SIGNAL_DISPLAY )
         Position ( 315 286 64 32 )
         Graphic ( cabsignal_lzb.ace )
      )
      TwoState (
         Type ( BELL TWO_STATE )
         Position ( 250 376 17 22 )
         Graphic ( n-schalter2.ace )
         NumFrames ( 2 2 1 )
         Style ( ONOFF )
         MouseControl ( 1 )
      )
      TwoState (
         Type ( RESET TWO_STATE )
         Position ( 230 376 17 22 )
         Graphic ( n-schalter2.ace )
         NumFrames ( 2 2 1 )
         Style ( ONOFF )
         MouseControl ( 1 )
      )
      TwoState (
         Type ( HORN TWO_STATE )
         Position ( 268 376 17 22 )
         Graphic ( n-schalter2.ace )
         NumFrames ( 2 2 1 )
         Style ( PRESSED )
         MouseControl ( 1 )
      )
      TwoState (
         Type ( WIPERS TWO_STATE )
         Position ( 214 376 17 22 )
         Graphic ( n-schalter2.ace )
         NumFrames ( 2 2 1 )
         Style ( ONOFF )
         MouseControl ( 1 )
      )
      TriState (
         Type ( FRONT_HLIGHT TRI_STATE )
         Position ( 49 402 20 25 )
         Graphic ( n-schalter1.ace )
         NumFrames ( 3 3 1 )
         Style ( NONE )
         MouseControl ( 1 )
         Orientation ( 1 )
         DirIncrease ( 1 )
      )
      TriState (
         Type ( DIRECTION TRI_STATE )
         Position ( 91 377 65 77 )
         Graphic ( n-rw.ace )
         NumFrames ( 3 3 1 )
         Style ( NONE )
         MouseControl ( 1 )
         Orientation ( 1 )
         DirIncrease ( 1 )
      )
      Dial (
         Type ( EQ_RES DIAL )
         Position ( 366 286 6 27 )
         Graphic ( n-zeigergelbGR.ace )
         Style ( NEEDLE )
         ScaleRange ( 0 13.333 )
         ScalePos ( 225 225 )
         Units ( BAR )
         Pivot ( 19 )
         DirIncrease ( 0 )
      )
      Dial (
         Type ( FUEL_GAUGE DIAL )
         Style ( POINTER )
         Units ( LITRES )
      )
      Dial (
         Type ( BRAKE_CYL DIAL )
         Position ( 366 286 6 27 )
         Graphic ( n-zeigerrotGR.ace )
         Style ( NEEDLE )
         ScaleRange ( 0 13.333 )
         ScalePos ( 227 227 )
         Units ( BAR )
         Pivot ( 19 )
         DirIncrease ( 0 )
      )
      Dial (
         Type ( MAIN_RES DIAL )
         Position ( 431 291 4 10 )
         Graphic ( n-zeigerrotKL.ace )
         Style ( NEEDLE )
         ScaleRange ( 0 16 )
         ScalePos ( 225 225 )
         Units ( BAR )
         Pivot ( 8 )
         DirIncrease ( 0 )
      )
      Dial (
         Type ( BRAKE_PIPE DIAL )
         Position ( 431 292 4 10 )
         Graphic ( n-zeigerGelbKL.ace )
         Style ( NEEDLE )
         ScaleRange ( 0 16 )
         ScalePos ( 225 225 )
         Units ( BAR )
         Pivot ( 8 )
         DirIncrease ( 0 )
      )
      MultiStateDisplay (
         Type ( OVERSPEED MULTI_STATE_DISPLAY )
         Position ( 278 343 11 10 )
         Graphic ( n-vmax.ace )
         States ( 2 2 1
            State (
               Style ( 0 )
               SwitchVal ( 0 )
            )
            State (
               Style ( 1 )
               SwitchVal ( 1 )
            )
         )
      )
      MultiStateDisplay (
         Type ( PENALTY_APP MULTI_STATE_DISPLAY )
         Position ( 343 342 11 10 )
         Graphic ( n-notbremse.ace )
         States ( 2 2 1
            State (
               Style ( 0 )
               SwitchVal ( 0 )
            )
            State (
               Style ( 1 )
               SwitchVal ( 1 )
            )
         )
      )
      MultiStateDisplay (
         Type ( ALERTER_DISPLAY MULTI_STATE_DISPLAY )
         Position ( 296 351 12 10 )
         Graphic ( n-sifa.ace )
         States ( 2 2 1
            State (
               Style ( 0 )
               SwitchVal ( 0 )
            )
            State (
               Style ( 1 )
               SwitchVal ( 1 )
            )
         )
      )
      Dial (
         Type ( SPEEDOMETER DIAL )
         Position ( 272 285 2 27 )
         Graphic ( n-tacho.ace )
         Style ( POINTER )
         ScaleRange ( 0 180 )
         ScalePos ( 225 129 )
         Units ( KM_PER_HOUR )
         Pivot ( 24 )
         DirIncrease ( 0 )
      )
   )
)

MfG
Loknarr
Bei Einbruch der Finsternis muss mit Dunkelheit gerechnet werden!

HERMA

  • Globaler Moderator
  • *****
  • Beiträge: 875
Re: Regleranzeige
« Antwort #5 am: 06. Januar 2010, 07:54:36 »
@Loknarr!

Combined_Control( 0 1 0.5 0.5 throttle dynamic )  oder
Combined_Control( 0 1 0.5 0.5 throttle train  )
in die eng-file ganz unten eintragen.
Es ist ein Kombihebel in der *.cvf eingetragen,

HERMA

Loknarr

  • Fahrdienstleiter
  • *****
  • Beiträge: 551
  • Oberpfalz
Re: Regleranzeige
« Antwort #6 am: 06. Januar 2010, 11:36:43 »
@HERMA

Funktioniert nicht... :'(
Außerdem wird die Anzeige für die Zugbremse auch nicht angezeigt...

MfG
Loknarr
Bei Einbruch der Finsternis muss mit Dunkelheit gerechnet werden!